Electrolyte, as a flammable and explosive medium used in chemical batteries, is toxic and corrosive, and unprotected contact can cause significant irritation to operators. Although electrolytes have a wide range of practical applications in the battery industry, how to safely and environmentally store them in large quantities and complete the transportation process has become a key issue due to the influence of electrolyte properties.
Stainless steel drums, as storage devices for electrolytes, are particularly important in the production of new energy industries. Due to the actual daily consumption of factories and the special characteristics of materials, the drums used to store electrolytes are often large equipment that is corrosion-resistant and has a large capacity. This also makes transportation more difficult.
In most industries, in order to reduce the steel cost and weight of equipment, the thickness of the barrel wall is usually between 1.5mm-2.5mm. After rust removal, polishing, and stretching, the barrel wall will become thinner. Due to the sensitivity of electrolyte to moisture in the air, it needs to be transported with inert gas. Under high-purity nitrogen protection, the acidity is less than 50PPM, and the pressure inside the barrel is kept between 0.02-0.08MPa to avoid chemical reactions and reduce the degree of corrosion to the barrel wall.
To ensure that the electrolyte is not contaminated, an intelligent pressure gauge can be installed by placing a quick interface above the ton bucket. Operators can use the pressure gauge to determine the current pressure inside the bucket and promptly replenish air. However, the pressure in the bucket is also very critical. Too little pressure will easily make it difficult to press out the electrode liquid, and too much pressure will easily lead to foam when the electrode liquid is discharged, or even the burst of the ton bucket will cause leakage and explosion. Therefore, an intelligent pressure gauge can be used to manually set the alarm area, and the pressure gauge will automatically issue a warning reminder when the alarm value is exceeded, preventing damage to the ton barrel and other production accidents.
